Toilet Repairs in Greater Roanoke Area

If your toilet isn’t flushing properly, try a few quick checks, then schedule service. We repair poor flushing, running, leaks, clogs, and unusual noises.

• Make sure the handle lifts the chain and flapper fully.
• Check that the tank water level is at the fill line.
• Brush the rim weep holes to restore bowl rinse.
• Use a plunger for minor clogs; don’t keep flushing.

Our licensed plumbers inspect the fill valve, flapper, handle, weep holes, and gaskets, then repair or recommend replacement. 24/7 emergency service is available in Roanoke and nearby. <br/> Updated: 2026-01-02 00:00:00 <br/> Need help in Rocky Mount, VA? Call (540) 234-2001 or book online. "He was informative and personable." — Lisa C.

The most common cause of a running toilet leak is a worn flapper or a faulty fill valve that keeps refilling the tank. These are primary components we inspect and replace when needed. We also check the handle, rim weep holes, and the gaskets between the tank, bowl, and floor. We service running, leaking, and poorly flushing toilets in Roanoke and nearby areas. <br/> Updated: 2026-01-02 00:00:00 <br/> Need help in Rocky Mount, VA? Call (540) 234-2001 or book online. "He was informative and personable." — Lisa C.

The most common cause of a toilet leaking from the base when flushing is a failed wax ring (the gasket that seals the toilet to the drain). When this seal loosens, cracks, or compresses unevenly, flush water escapes at the floor instead of going down the waste line. Other culprits include a rocking toilet from loose closet bolts, a cracked or corroded flange, or a hairline crack in the bowl. If it only leaks during a flush, the waste-seal path is the problem, not the tank hardware. Our team regularly sees this in homes across the Roanoke–Salem area and begins with a full component check before recommending reseating or replacement.

Look for these repair clues:

• Toilet shifts or bolts won’t stay tight
• Water appears at the base right after a flush
• Musty odor or staining around the toilet
• Recent clog or backup before the leak started

Until a plumber can reseal or repair, shut off the supply at the valve and avoid using that toilet to prevent subfloor damage. <br/> Updated: 2026-02-24 <br/> Need help in Salem, VA? Call (540) 238-0320 or book online.

Toilet replacement pricing is fixed and upfront after an on-site inspection. Costs vary by the toilet you choose and any needed repairs. Common drivers: comfort-height or low-consumption models, flange or wax-ring fixes, shut-off valve or supply-line updates, and haul-away. We serve Roanoke and Rocky Mount and can review upgrade options. Diamond Club members get 10% off repairs and reduced service fees from $99 to $69 for $24/month. 24/7 service is available. <br/>

Updated: 2026-01-02 00:00:00

Yes, you can replace a toilet fill valve yourself if the shutoff valve works and the tank hardware moves freely. Most DIY issues happen when old supply nuts or tank locknuts are seized, which can crack the porcelain if forced. The task is moderate: drain the tank, swap the valve, and set the water level so the fill line sits below the overflow tube. If you run into stuck parts, hidden leaks, or recurring fill problems, a licensed plumber can prevent damage and dial in the water level correctly. We handle quick, clean valve replacements for homeowners in Salem and nearby communities.

Call a pro if you notice any of the following:

• The shutoff won’t close or the supply line looks brittle.
• The tank locknut or bolts are corroded or won’t budge.
• The toilet still runs after the new valve (often a flapper or rim-wash issue).
• Water appears at the base, suggesting a wax ring or flange problem.

If you try it yourself, shut off water fully, support the valve to prevent tank twisting, and don’t overtighten the plastic locknut. <br/> Updated: 2026-02-24 <br/> Need help in Salem, VA? Call (540) 238-0320 or book online.